|
Input
signals |
Thermocouples |
B,
R, S, K, E, J, T, WWRe5-26, WWRe0-26, Ni-NiMo, AuFe-Cr, N, PR5-20, PR20-40,
Platinel, U, L |
| DC
voltage |
±10mV, ±20mV, ±50mV, ±100mV, ±5V |
| DC
current |
±20mA |
| Resistance
thermometers |
Pt100,
JPt100, Pt50, Pt-Co |
| Accuracy
rating |
±0.1%
of input span ±
1 digit or 10µV,
whichever is larger
(For thermocouple
inputs, reference junction temperature compensation accuracy is not included.) |
| Reference
temperature compensation accuracy |
±0.5°C |
| Sampling
period |
About
0.1 second (about 0.2 second for models with fuzzy function) |
|
Burnout |
Upscale
burnout for thermocouple and mV inputs |
|
Output
at burnout |
Optional
set value between -5% and 105% of control output |
| At
burnout |
High
alarm activation |
| Scaling |
DC
voltage and DC current inputs: Optional scaling within 4 digits |
| Displays |
1st
display part - 7-segment back-lit LCD
2nd
display part - Full dot-matrix (96 x 20 dots) back-lit LCD
Adjustable angle
of viewing (±
20
degrees) |
| Power
Supply |
85
to 264 VAC, 50/60 Hz (universal power supply) |
| Ambient
temperature |
-10
to 50°C |
| Ambient
humidity |
Less
than 90%RH (no dew condensation) |
| Power
consumption |
100VAC
maximum 15VA, 200VAC maximum 20VA |
| Weight |
About
750g (about 900g for models with full options) |
| Control
switching cycle |
About
0.1 second (about 0.2 second for models with fuzzy function) |
| Control
system |
Current
output type PID, On-off pulse type PID, SSR drive pulse type PID, On-off
servo type PID |
| Control
set value |
Up
to 8 (4-digit) values can be set. |
| Set
value change ratio |
Setting
of slope when the control set point is changed. Ratio 0000 to 9999/minute
(0 for step response) |
| Control
setting accuracy rating |
±I
digit (relative error to indicating value) |
| Auto
tuning |
Provided.
PID constants can also be set manually. |
| PID
constants |
Settings
for each of 8 set values are possible.
P: 0 to 999.9%
(0 for on/off control)
I: 0 to 9999 seconds
(0 for without reset action)
D: 0 to 9999 seconds |
| Fuzzy
function |
Overshoot
suppression by fuzzy calculation (option) On-off pulse conductive signal |
| Anti-reset
windup |
Setting
of reset action: (-) 99.9 to 99.9% |
|
Current
output type PID |
Output
signal: |
4
to 20mADC |
| Load
resistance |
Less
than 750 |
|
On-off
pulse type PID |
Output
signal |
On-off
pulse conductive signal |
| Contact
capacity |
Resistive
load: 100VAC less than 2A, 200VAC less than 1A
Inductive load:
100VAC less than 1A, 200VAC less than 0.5A
Minimum load:
more than 5VDC 10mA |
| On-off
pulse period |
Variable
between about 1 to 180 seconds |
|
SSR
drive pulse PID |
Output
signal |
On-Off
pulse voltage signal
ON: 12VDC ±
10% (maximum 20mA)
OFF: Less than
0.6VDC |
| On-off
pulse period |
Variable
between about 1 to 180 seconds |
|
On-off
servo type PID |
Output
signal |
On-off
servo conductive signal |
| Contact
capacity |
Inductive
load 100VAC 1A, 200VAC 0.5A |
| Feedback
resistance |
100
to 2k |
| Load
current |
Standard:
Maximum 1A, minimum 20mA
Light load: Maximum
20mA, minimum ImA |
| Alarm
points |
4
points for each control set point |
| Alarm
system |
High/low
alarms and deviation/absolute-value alarms
With standby function,
independent setting for each set value |
| Alarm
output |
Transistor
open-collector output (maximum load 24VDC, 50mA) |
| Communications
interface |
RS-232C,
RS-422A (option) |
| CE-marking |
EN55011
Group 1 Class A, EN50082-2, EN61010-1 + A2 (option) |
