|
Input
signals |
Thermocouples |
B, R, S,
K, E, J, T, WWRe5-26, WWRe0-26, Ni-NiMo, AuFe-Cr,
N, PR5-20, PR20-40,
Platinel, U, L |
|
DC voltage |
±10mV,
±20mV, ±50mV, ±100mV, ±5V |
|
DC current |
±20mA
|
|
Resistance
thermometers |
Pt100,
JPt100, Pt50, Pt-Co |
|
Accuracy rating |
± 0.1% of input span ± 1 digit or 10µV,
whichever is larger
(With thermocouple inputs, reference
junction temperature compensation accuracy is
not included.) |
|
Reference temperature compensation
accuracy |
±0.5°C |
|
Sampling period |
About 0.1 second |
|
Burnout |
Upscale burnout for thermocouple and mV
inputs |
|
Output at burnout |
Optional set value: between -5% and 105% of
control output |
|
At burnout |
High alarm activation |
|
Scaling |
DC voltage and DC current inputs: Optional
scaling within 4 digits |
|
Displays |
1st display part: 7-segment
back-lit LCD
2nd display part: Full
dot-matrix (96 x 20 dots) back-lit
LCD
Adjustable
angle of viewing (± 20 degrees) |
|
Power supply |
85 to 264VAC, 50/60Hz (universal power
supply) |
|
Ambient temperature |
-10 to 50°C |
|
Ambient humidity |
Less than 90%RH (no dew
condensation) |
|
Power consumption |
100VAC maximum 15VA, 200VAC maximum
20VA |
|
Weight |
About 750g (about 900g for models with full
options) |
|
Program pattern setting system |
Key switch setting |
|
Number of program pattern steps |
Maximum 19 steps/pattern |
|
Number of program patterns |
Maximum 19 patterns |
|
Number of program pattern
repetitions |
Maximum 9999 times |
|
Number of program step
repetitions |
Maximum 99 times |
|
Parameters to be selected for each
step |
PID constants (8 types, SV section
automatic switching), Alarm (8 types x 4 points),
Output limiter (high and low limits, 8 types),
Output variation limit (8 types), Actual
temperature compensation (8 types), Waiting time
alarm (8 types), Sensor compensation (8 types),
Time signals (total 10 types: 8 types, all OFF and
all ON) |
|
Control switching cycle |
About 0.1 second |
|
Control system |
Current output type PID, On-off pulse type
PID, SSR drive pulse type PID, On-off servo type
PID, Voltage output type PID (option) |
|
Auto tuning |
Provided. PID constants can also be set
manually. |
|
PID constants |
Settings for each of 8 set values are
possible.
P: 0
to 999.9% (0 for on/off control)
I: 0 to 9999 seconds (0 for
without reset action)
D: 0 to 9999 seconds
|
|
Anti-reset windup |
Setting of reset action: High 0 to 50.0%,
Low (-) 50 to 0% |
|
Current output type PID |
Output signal: 4 to 20mADC
Load resistance: Less than 750 |
|
On-off pulse type PID |
Output signal |
On-off pulse conductive signal |
|
Contact capacity |
Resistive load: 100VAC less than 2A, 200VAC
less than 1A
Inductive load: 100VAC less than 1A, 200VAC
less than 0.5A
Minimum load: more than 5VDC
10mA |
|
Alarm points |
On-off pulse period |
Variable between about 1 to 180
seconds |
|
SSR drive pulse PID |
Output signal |
On-Off pulse voltage signal
ON: 12VDC ±
10% (maximum 20mA)
OFF:
Less than 0.6VDC |
|
On-off pulse period |
Variable between about 1 to 180
seconds |
|
Contact protective element |
Not built-in (sold
separately) |
|
On-off servo type PID |
Output signal |
On-off servo conductive signal |
|
Contact capacity |
Inductive load: 100VAC 1A, 200VAC
0.5A |
|
Feedback resistance |
100to 2k |
|
Load current |
Standard: Maximum 1A, minimum
20mA
Light
load: Maximum 2mA, minimum ImA |
|
Alarm points |
4 points for each control set
point |
|
Alarm system |
High/low alarms and
deviation/absolute-value alarms
With standby
function, independent setting for each set
value. |
|
Alarm outputs |
Transistor open-collector output
(maximum load 24VDC, 50mA) |
|
Communications
interface |
RS-232C, RS-422A
(option) |
|
CE (option) |
EN61326 + A1 Class A,
EN61000-3-2 + A14
EN61000-3-3, EN61010-1 +
A2 |
