|
|
|
|
| Input
Specifications |
 |
|
| Measuring points: |
6 points, 12 points |
| Input types: |
Universal
DC voltage --- ±13.8mV, ±27.6mV, ±69.0mV ±200mV, ±500mV, ±2V ±5V*, ±10V*, ±20V*,
±50V* (*with built-in voltage divider)
DC current --- With external shunt resistor (sold separately)
Thermocouple --- B, R, S, K, E, J, T, N, PtRh40-PtRh20, W-WRe26, WRe5-WRe26,
PlatinelⅡ, NiMo-Ni, CR-AuFe, U, L
Resistance thermometer --- Pt100, JPt100, Pt-Co, Pt50 |
| Accuracy ratings: |
Refer to the table of measuring range and
accuracy ratings |
| Reference junction compensation accuracy:
|
K, E, J, T, N, PlatinelⅡ--- ±0.5°C or less R,
S, W-WRe26, WRe5-WRe26, NiMo-Ni, CR-AuFe,U, L --- ±1.0°C or less |
| Sampling rate: |
Approximately 100ms for all points Burnout:
Disconnection of input signal is detected on thermocouple and resistance
thermometer input. UP/DOWN disable is selectable for each input |
| Scaling: |
Range/scale is selectable when DC
voltage/current is programmed |
| Digital filter: |
Programming FIR filter for each point (common
to all points) |
| Allowable signal source resistance: |
Thermocouple input (burnout disable)/
DC voltage input (±2V or less) ---1kΩ or less
DC voltage input (±5V to ±50V) ---100Ω or less
Resistance thermometer --- Per wire 10Ω or less
(same resistance for 3 wires) |
| Input resistance: |
DC voltage, thermocouple input ---
Approximately 1 MΩ |
| Maximum input voltage: |
DC voltage input (±2V or less)/
thermocouple input (burnout disable) --- ±10VDC
DCvoltage input (±5V to ±50V) --- ±60VDC |
| Dielectric strength between channels: |
1000V AC or more between each channel
(High strength semiconductor relay used) |
| Recording
Specifications |
|
|
| Internal memory: |
Flash memory (capacity: 4MB) |
| External memory: |
CF card (capacity: 32MB to 2GB) 128MB CF card is included
as standard. |
| Recording cycle: |
00, 200, 500ms*
1, 2, 3, 5, 10, 15, 20, 30s
1, 2, 3, 5, 10, 15, 20, 30, 60min |
| Numbers of logging files: |
250/numbers of used groups |
| Logging data: |
Measured data --- File name (group name), time of day,
month and year of recording start, tag, measured data, alarm status/types
Setting parameter |
| Storing types: |
Binary/CSV type |
| Storing methods: |
Manual start/stop (dedicated key operation)
Schedule (designation for time of day and date)
Trigger signal (alarm event)
*Pre-trigger is selectable
Measuring numbers of pre-trigger --- Maximum 950 data |
| *Recording cycle: |
Up to 3 groups of 12 points/group can be programmed for
100, 200 and 500ms recording. 5 groups of 44 points/group for recording with 1s
or more. (Total of 100 points programming possible) |
|
Computation Specifications |
|
|
| Computation points:
|
Maximum 44 points |
| Computation types:
|
| Arithmetic operations |
Addition, subtraction, multiplication, division, remainder,
exponential |
| Comparison operations |
Equality, inequality, great, less, equality /great, equality / less |
| Logical operations |
AND, OR, XOR, NOT |
| General functions |
Round-up, round-down, absolute value, square root, exponent of e,
natural logarithm, common logarithm |
| Integration operations |
Analog integration, digital integration |
| Channel data operations |
Measured data computation, calculated data computation |
|
| Alarm
Specifications |
|
|
| Setups: |
Up to 4 alarms can be programmed per channel |
| Alarm types: |
Upper limit, lower limit, differential higher limit,
differential lower limit (deadband is selectable), abnormal data |
| Delay function: |
Setup range of alarm delay --- 1 to 3600 seconds
|
| Alarm settings: |
AND/OR selectable |
| Display
Specifications |
|
|
| Display: |
5.6"TFT color LCD
|
| Display types: |
Measured data display (Trend screen, Data
screen, Bar-graph screen)
Historical trend display (simultaneous display with Real-time trend is
available)
Information display (alarm display, marker list, file list)
Setting screen (alarm, computation, memory, system, maintenance, communication,
etc.) |
| Trend screen: |
12 colors selectable
Display screen--- 5 screens (5 groups)
Display points --- Maximum 44 points/screen
Time axis direction --- Vertical or horizontal
Line width --- 1/3/5 dot selectable
Scale display --- 4 scales
Tag/data display --- Show/hide selectable
Marker display |
| Data screen: |
Display screen --- 5 screens (5 groups)
Display points --- Maximum 44 points/screen
Display contents --- Measured value, channel/tag, unit, alarm status |
| Bargraph screen: |
12 colors selectable
Display screen --- 5 screens (5 groups)
Display points --- Maximum 44 points/screen
Display direction --- Vertical or horizontal
Scale display --- 1 scale |
| Information display: |
Alarm display (alarm activation/released
history display)
Marker list
File list (group data file list display) |
| LCD back light: |
Auto/manual OFF function
Brightness --- 4 levels adjustment |
| *The LCD display may contain some
pixels that always or never illuminate, and the brightness of some areas of the
display may appear uneven. There are typical LCD performance characteristics and
do not constitute malfunctions. |
|
Communication Functions |
|
|
| Network |
Communication type:
 |
Ethernet (10BASE-T/100BASE-TX) |
| FTP server: |
Data file can be read from the network computer |
| Web server: |
Conformed to HTTP1.0 --- Displays the alarm, information
of maintenance by browser software (InternetExplorer5.0 or later,
NetScape6.0 or later, Opera7 or later)
* User's ID and password registration available |
| E-Mail: |
E-Mail notification at specified time for alarm
activation Report data at specified time is selectable from all
registered data
Notification address --- Maximum 8 contacts |
|
| USB Communications |
USB:
|
Communication type --- USB1.1
Transfer systems --- Bulk transfer, control transfer
Communication contents --- File transfer by virtual drive connection
|
|
|
Option Specifications |
|
|
| Alarm output |
Relay contact output at alarm activation and
abnormal input
Output points: 12 points
Contact capacity: Mechanical relay --- 100V AC 0.5A, 240V AC 0.2A |
| Communication interface
|
Communication interface for high-order
instruments RS232C/RS485 switchable
*Ethernet and USB equipped as standard |
|
Programming/Operation Specifications |
|
|
| Function key types: |
HOME, MENU, DISP, MARKER, SCROLL, CURSOR,
START, STOP, DIRECTION keys, ENTER, ESC |
| HOME settings: |
Simple recording settings --- Common input to
all channels
Parameter programming for all channels together, recording cycle, selection
settings |
| MENU settings: |
Input/computation programming --- Input
parameter, computation parameter
DISP settings --- Data channel parameter, group parameter, common parameter
(combination display, trend vertical/horizontal)
Alarm settings
File settings (5 individual files) --- Storing method settings Marker text
settings
System settings --- Communication, clock, maintenance, key lock, password,
screen, etc. |
| DISP operations: |
Operating screen selection --- Trend, data,
bar-graph, historical trend, alarm display, maker list
Display selection on each screen --- Group 1 to 5 selectable |
|
General Specifications |
|
|
| Rated power voltage: |
100 to 240V AC (universal power supply)
50/60Hz |
| Maximum power consumption:
|
50V A (DO: all points ON, 240V AC)
|
| Reference operating condition:
|
Ambient temperature/humidity range --- 21 to
25°C, 45 to 65%RH
Power voltage --- 100V AC±1.0%
Power frequency --- 50/60Hz±0.5%
Attitude --- Left/right 0°, forward/backward 0°
Warm-up time --- Longer than 30 minutes |
| Normal operating condition:
|
Ambient temperature/humidity range --- 0 to
50°C, 20 to 80%RH
Power voltage --- 90 to 264V AC
Power frequency --- 50/60Hz±2%
Attitude --- left/right 0°, forward tilting 0°,
Backward tilting 0° to 20° |
| Transportation condition |
(at the packed condition on shipment from our
factory):
Ambient temperature/humidity range --- -20 to 60°C, 5 to 90%RH
(Note; No dew condensation)
Vibration --- 10 to 60Hz 0.5G (4.9m/S2) or less
Impact --- 40G (392m/ S2) or less |
| Storage condition: |
Ambient temperature/humidity range -20 to
60°C, 5 to 90%RH
(Note; No dew condensation) |
| Power failure protection: |
Setups and data are backed up by flash memory
Clock --- Lithium battery backs up RAM (Minimum 5 years) |
| Insulation resistance: |
Secondary terminals and protective conductor
terminals --- 20MΩ or more at 500V DC
Primary terminals and protective conductor terminals --- 20MΩ or more at 500V DC
Primary and secondary terminals --- 20MΩ or more at 500V DC |
| Dielectric strength: |
Secondary terminals and protective conductor
terminals --- 1 minute at 500V AC
Primary terminals and protective conductor terminals --- 1 minute at 1500V AC
Primary and secondary terminals --- 1 minute at 2300V AC |
| Case assembly material: |
Door frame --- ABS resin
Case --- Steel |
| Color: |
Door frame --- Black (equivalent to Mussel
N3.0)
Case --- Painting color, gray (equivalent to Mussel N7.0) |
| Weight: |
2.2kg |
| Mounting: |
Panel mounting |
| Terminal screws: |
Power terminals/protective conductor
terminals/communications terminals --- M4.0
Measuring input terminals/alarm output terminals/remote contact terminals ---
M3.5 |
