|
Model MR5320 is a
small size and lightweight 2-channel card logger capable
to monitor temperature in two places and store up to
6000 data per channel, and is washable (IP64 - splash
proof). |
 |
 |
|
Measuring range |
-40 to 60°C, 0 to 100°C, 50 to 150°C
(Ranges are automatically switched by judging a
sensor to be used.)
With the built-in sensor
(Channel 1 only): -40 to 60°C |
|
Accuracy rating |
±0.5°C ± 1 digit (for -5 to 50°C)
Except
above: ±1.0°C ± 1 digit |
|
Sensor |
Built-in (Channel 1 only)/External
switching
* Various types of sensors (separate
purchase required) including general type,
water-proof type, needle type and surface type are
available. |
|
Input point |
Two points |
|
Number of data stored |
6000 data/each channel |
|
Display contents (Each channel) |
Current data: Month, day, hour, minute,
measured temperature in Channel 1 and Channel
2
Recalling data: Maximum temperature, minimum
temperature and average temperature in stored data
in Channel 1 and 2
Parameters: High alarm
setpoint and low alarm setpoint of Channel 1 and
2 |
|
Operation by logger |
Display start-up (With auto-off function:
Display goes out after one minute.)
Display
content selection (clock setting, logging
start/stop, key lock/release)
* Three function
keys of DISP, SEL and REC |
|
Communications function |
Infrared communications to the exclusive
data readout unit (separate purchase
required)
Settings of parameters and recalling
of stored data/logging parameters by the exclusive
analytical software package |
|
Settings by PC |
Clock, logging start time/stop time (in
case of the measurement/logging interval (10 to 50
seconds or 1 to 60 minutes), high/low alarm
temperatures, key locking of logger, logging mode
(automatic stop/endless) |
|
Battery |
AAA (UM-4), 2 pieces |
|
Outside dimensions/weight |
54 (W) x 110 (H) x 20.5 (D) mm, 95g
(Including batteries) |
|
CE |
EN-61326, Emission: Class B, Immunity:
Requirement for portable test and measurement
equipment |
|
MR9503 Data Readout
Unit
- Card loggers can display
or printed out data in a table format or a trend graph
format by connecting to a personal computer through
this data readout unit.
- The data stored can be
managed by a file and treated by worksheet
applications commercially available.
- The card loggers can
connect to this data readout unit through reliable
infrared communications without any physical
contact.
|
|
Specifications of MR9503
(with analytical software) |
|
Model |
MR9503 |
|
PC |
DOS/V |
|
RS232C connector |
D-sub
9-pin, With a cable of 1.5m attached with a noise
filter |
|
Environment |
Windows
95/98/2000/Me |
|
Hard disk:
10MB free space or more |
|
Communications |
Between a
card logger and this data readout unit:
Non-contact infrared type |
|
Between
this data readout unit and a PC: RS-232C
(communications at a serial port) |
|
Working environment |
0 to 40
°C; 10 to 80%RH (No condensation) |
|
Storage environment |
-20 to
55°C; under 90%RH (No condensation) |
|
Outside dimensions/weight |
59.5 (W) x
107 (H) x 31.5 (D) mm,
180g |
|
Analytical software
package |
|
Settings |
Clock,
start time, measuring interval, totalizing
direction, card No., test No., logging type,
reference value |
|
Recalling |
Parameters, stored data, number of stored
data, number of errors |
|
Computation |
Maximum
value, minimum value, average value, totalized
value |
|
Display |
All data
(measured data per year, month, day, hour, or
minute), trend graph |
|
Data storage |
Storage in
file format or text format by this software
package |
|
Printout |
List
printing, parameter printing, trend
graph |
|
 |
|
