|
These testing equipment are
for the fields of performance/evaluation tests of fuel
cells, and are applicable to from fundamental research
such as element research, material research and
single-cell/module research to practical application
test. CHINO offers total coordination from designing and
manufacturing to engineering works at site, adjustment
and delivery such as gas supply, moisturizing volume
control, temperature control, data measurement and
automatic operation. |
  |
|
Dimension |
W600 x
H1000 x D600mm |
|
Color |
2.5Y9/1 |
|
Power supply |
1 200VAC 15A |
|
Weight |
About
100kg |
Gas supply line
It receives gas from 0.4MPa to 1MPa
and supplies it to a fuel cell. In addition, it has a
safety function to cut anode and cathode gas at alarm
activated and to automatically purge nitrogen gas to the
equipment and the fuel cell. |
Moisturizing line
Moisturizing volume (moisturizing
temperature control) is an important item for cell
performance.
The moisturizing unit in this equipment
utilizes precision temperature control system using
resistance thermometer, and is using techniques of high
efficiency vapor-liquid contact by SUS316L bubbler and
protection of dew-condensation after
moisturizing.
The capacity of the moisturizing unit
is 8-hour/day.
Liquid-crystal display unit is used to
display cell information of generated voltage and
current and to set alarm information, power generation
start, etc. sequentially. In addition, fuel utilizing
ratio constant control (automatic settings of anode and
cathode gas flow proportioning to load
current). |
Safety line
For heater line, independent dual safety
function, high limit alarm of controller and separate
alarm unit, are built-in. Safety operation are heater
power supply turning off, fuel
cell/oxidizing reagent supply stopping,
automatic purging of nitrogen in each pole,
and electronic load unit [OA] for safety of
equipment and cell. |
|
|
 |
|
