CHINO
Infrared Thermometers
IR-BA Series High-speed Compact Radiation Thermometers
The IR-BA series is a non-contact and high-speed compact radiation thermometer. The card sized thermometer with built-in signal converting function of 4-20mA output can easily be installed in narrow places, production lines and small equipment.
A standard speed type and a high-speed type (50ms/95%) are respectively available in standard type and small-target/short-distance type and small-target/long-distance type, and special application types for glass, lamp-anneal, film, and burning gas.
IR-BA Series
TabView Example - Basic From Existing Markup
    High-speed response
    Standard: 100ms, High-speed: 50ms
    Compact & light-weight
    W32 x H56 x D100 mm, 220g
    Signal conversion built-in
    Emissivity setting by digital switch
    Peripheral units including:
    Indicator with power supply, converter with reflection correction, etc.
    CE
    Excluding special application types (IR-BAX)
    General Type
    IR-BAT1A Standard 0-300°C 100ms Φ40/500mm Less than 300°C:
    ±3°C
    300°C or higher:
    ±1% of measured value
    (at ε = 1.0 and reference operating condition)
    8 to 14µm
    IR-BAT1B 0-600°C
    IR-BAT2A Small target/
    Short distance
    0-300°C Φ5/80mm
    IR-BATSA Small target/ 0-300°C Φ40/1000mm
    IR-BATSB Long distance 0-600°C
    High-Speed Type
    IR-BAT1M Standard 0-300°C 50ms Φ40/500mm Less than 300°C:
    ±3°C
    300°C or higher:
    ±1% of measured value
    (at ε = 1.0 and reference operating condition)
    8 to 14µm
    IR-BAT1P 0-600°C
    IR-BAT2M Small target/
    Short distance
    0-300°C Φ5/80mm
    IR-BATSM Small target/
    Long distance
    0-300°C Φ40/1000mm
    IR-BATSP 0-600°C
    Application Type
    IR-BAXG1 Glass 100-400°C 1s Φ20/150mm ±4°C 4.6 to 5.2µm
    IR-BAXL1 Lamp anneal 400-1300°C 1s Φ40/500mm 1% 3.43µm half-band width 120nm
    IR-BAXF1 Polyethylene 80-250°C 1s Φ40/500mm ±4°C
    IR-BAXF2 Polyester 50-150°C 1s Φ40/500mm ±4°C 7.6 to 8.4µm
    IR-BAXH1 Burning gas 500-1300°C 10s Φ100/1000mm 1.5% 4.3µm

    Measurement Wide-band system (General type and high-speed type)
    Narrow-band system (Special application type)
    Element Thermopile
    Resolution 0.2°C (0-300°C) general type
    0.5°C (0-600°C) high-speed type
    Repeatability ±0.2°C (0-300°C) general type
    ±0.3°C (0-600°C) high-speed type
    Optics Ge lens
    Emissivity 1.99 to 0.10 by digital switch
    Analog output 4 to 20mADC (Load: less than 280Ω)
    Working temperature 0 to 50°C
    Power 12 to 24VDC
    Current consumption 60mA or lower
    Connecting cable Standard 2m 5m for IR-BAXH1
    Casing Diecast aluminum
    Water proofing JIS C-920 Drip-proof II, IP-X2
    Mounting Fixing 2 x M4 screws or tripod
    Weight About 220g
    CE EN61326 Class A, EN61326 Annex A
    Except special application types and extension cable type
    Conditions for CE conformance 1. An individual DC power unit for thermometer is required.(Recommended power unit: IR-ZFEP)
    2. All of the thermometer, the connection cable, and a DC power unit should be used indoors.
    Stability ±10°C under the EMC test environment
    PS Sheet IR-BAT Series PSE-412D Download
© 2017 CHINO Works America Inc.