Infrared Thermometers
IR-ESC Series Scanning Type Radiation thermometers
The IR-ESC series is scanning type radiation thermometers for low temperature and is applicable to measure width-direction temperature patterns of moving or rotating objects. The temperature range is 100°C to 600°C.
The system is consisted of a scanning unit, a display/operation unit with a built-in exclusive software for operation and graphic display, and connection cables.
IR-ESC Series
IR-ESC Series
TabView Example - Basic From Existing Markup
    The small sized (300 x 200 x 120mm) scanning unit is easy to install.
    The temperature range is wide (100°C to 600°C).
    The display/operation unit with a built-in exclusive software displays thermal-images in pattern, trend and color modes (Windows95 or WindowsNT4.0, to be specified).
    The output is 0 to 5VDC for 7 position points + 1 peak point or 3 zone peak points.
    For targeting of objects, a direct viewfinder type or laser spotting type are available. (option)
    An exclusive kiln shell software for cement kilns is separately prepared.
    Model Type
    IR-ESCF21⬚ Scanning unit Scanning speed 5 times/second
    IR-ESCF22⬚ Scanning unit Scanning speed 10 times/second
    IR-EPW5 Display/operation unit Wndows95
    IR-EPN5 Display/operation unit WindowsNT4.0
    IR-ZECC⬚⬚⬚ Cable between scanning unit and relay terminal unit
    IR-ZEPC⬚⬚⬚ Cable between relay terminal unit and display/operation unit
    IR-ZERC⬚⬚⬚ Cable for output from display/operation unit
    IR-ZECS Protective case
    Scanning Unit
    Scanning system Optical axis scanning by a rotating mirror
    Element Cooling type PbS
    Scanning angle 90°
    Scanning speed 5 times/second or 10 times/second (to be specified)
    Measuring system Narrow-band type radiation thermometer
    Measuring temperature 100 to 600°C
    Accuracy rating Less than 400°C: ±4°C
    400°C or higher: ±1.0% of measured value
    (atε= 1, ambient temperature 23°C ± 5°C)
    Resolution Less than 400°C: 3°C
    400°C or higher: 2°C
    Emissivity compensation 1.0 to 0.2
    Measuring distance 0.5m to ∞
    Instant viewfield (mm𝟘) Measuring distance L (mm)/Distance factor 150
    Response time 0.5ms (90% response)
    Targeting Direct viewfinder or laser spot (option)
    Laser ON/OFF by switch, Laser: less than 1mW, 645mm, class 2
    Output Temperature pattern: 0 to 20mADC, Peak temperature: 4 to 20mADC, Scanning angle: Open collector (max load voltage 35VDC, max load current 10mADC)
    Emissivity remote setting 4 to 20mADC
    Working temperature 0 to 50°C
    Power supply 100 to 240VAC
    Allowable voltage fluctuation +10% to 15% of rated value
    Power consumption About 40VA
    Connection Connector connection
    Cable length Exclusive cable, maximum 200m
    Case material/color Aluminum/gray
    300W x 200H x 120Dmm, about 6.5kg
    Display/operation unit
      Windows95 or WindowsNT4.0 (to be specified)
    CRT 800 x 600 dots
    Screen Thermal-image display in pattern, trend and color modes
    Input 0 to 5VDC (adding 250Ω to 4 to 20mADC from scanning unit)
    Output 0 to 5VDC (without isolation)
    Output points (1) 7 position points + 1 peak point or (2) 3 zone peak points at sampling mode
    Software Built-in thermal-image software
    Rated power voltage 100 to 240VAC 50/60Hz
    Weight About 8.5kg
    Kiln shell software
      Kiln shell hot spot monitoring (Zone peak temperature graph, thermal-image display, historical display, report output)
    Screen renewal cycle At each 2-rotation of kiln
    Hot detection Hot detection at the maximum temperature in each zone (with a function detecting rate-of-change)
    Zone division: 20 divisions (optional position setting)
    Hot detection: Alarm setting temperature Zone maximum temperature, Alarm setting: Setting at each zone
    Radiation temperature measuring range: 0.1°C increment
    Maximum scanning 250 times/1 kiln rotation
    Thermal-image display color Color/°C (400 colors in case of measuring range of 100 to 600°C)
    Screen Main screen
    (1) Data display: Zone peak temperature bar graph, Extensive thermal-image
    (2) Function button: Settings, Start/stop of measurement, History, Quit
    (3) Operation status (measuring, waiting)
    Setting Alarm setting
    Data storage Zone maximum/minimum temperature per hour, Each zone maximum temperature per day, Extensive thermal-image at detection of maximum temperature per day, Maximum/minimum/average temperature pattern per day, Semipermanent storage (about 1GB exclusive file in year)
    Storage type: Exclusive file (automatic storage, for replay), Excel 97 type file (each 1 hour data base, trend data)
    History/analysis Data base replay/display at historical mode, Printer output of report
    (1) Data viewer: List display of stored data
  • Data per day: Date, time, maximum temperature, its generated zone
  • Extensive thermal-image: Thermal-image at detection of maximum temperature per day
  • Data/hour: List display of maximum temperature per hour of each zone (generated data identification enabled)

    (2) Pattern data reading screen
  • Maximum/minimum/average temperature pattern per day, alarm/zone, setting temperature display, printing

    (3) Report: Display of daily report, monthly report, image report (per day), Printer output

    (4) Trend: Historical trend of peak temperature of each zone, Printer output (with functions of time-axis expansion and scroll)
© 2018 CHINO Works America Inc.