-40 to 60°C, 0 to 100°C, 50 to 150°C (0 to 50°C is available. For display only)
(Ranges are automatically switched by judging a sensor to be used.) |
| ±1.0°C ± 1 digit (±0.5°C ± 1 digit for -5 to 50°C) |
| Built-in/External switching (Automatically switched to External when an external mounting sensor is inserted, Measuring range of the built-in sensor: -40 to 60°C) |
| One |
| 6000 data (About 8-month data storage at the 60-minute measurement interval) |
| Automatic stop mode under specified conditions or endless mode by a PC |
| Built-in (Connection to a PC through a data readout unit) |
| Reflection type liquid crystal display |
| Current data |
Month, day, hour, minute, temperature (°C) |
| Recalling data |
Data being stored per month, day, hour, minute or the following data in the stored data
-Totalized data (°CH) of lower (L) or higher (H) temperature than a reference temperature
-Number of activated alarms for higher or lower limit, and month, day, hour, minute and its temperature of activated alarm
-Maximum, minimum and average temperature |
| Parameters |
Clock: Year, month, day, hour, and minute (Corresponding to leap years)Start time: Month, day, hour, and minuteMeasurement interval: 1 to 60 minutes (1-minute increments) or 10 to 50 seconds (10-second increments) Reference temperature: Reference temperature for totalization. |
| High or low totalization |
| High or low alarm |
| AAA (UM-4), 2 pieces Battery life: About 1 year (At 25°C and 10-minute interval) |
| -20 to 55 °C; 10 to 80%RH (No condensation) |
| -20 to 55°C; under 90%RH (No condensation) |
| IP64 (Splashing proof) |
| ABS Resin, PANTONE® color (equivalent to 552C) |
| 54 (W) x 110 (H) x 20.5 (D) mm, 95g (Including batteries) |
| EN-61326, Emission: Class B, Immunity: Requirement for portable test and measurement equipment |
MR9503 Data Readout Unit
Card loggers can display or printed out data in a table format or a trend graph format by connecting to a personal computer through this data readout unit.
The data stored can be managed by a file and treated by worksheet applications commercially available.
The card loggers can connect to this data readout unit through reliable infrared communications without any physical contact. |
| MR9503 |
| DOS/V |
| D-sub 9-pin, With a cable of 1.5m attached with a noise filter |
Windows 95/98/2000/Me
Hard disk: 10MB free space or more |
| Between a card logger and this data readout unit: Non-contact infrared type |
| 0 to 40 °C; 10 to 80%RH (No condensation) |
| -20 to 55°C; under 90%RH (No condensation) |
| 59.5 (W) x 107 (H) x 31.5 (D) mm, 180g |
| Clock, start time, measuring interval, totalizing direction, card No., test No., logging type, reference value |
| Parameters, stored data, number of stored data, number of errors |
| Maximum value, minimum value, average value, totalized value |
| All data (measured data per year, month, day, hour, or minute), trend graph |
| Storage in file format or text format by this software package |
| List printing, parameter printing, trend graph |
